BLP Billet Return By-Pass Fuel Regulator
Product Description
This Regulator is designed to work with any belt driven fuel pump and is calibrated for use with a carburetor. It can be adjusted to work with either gas or methanol by simply turning the adjuster in or out.
The regulator is preset to 10 PSI at 7,000 engine RPM using a 0 Fuel Pump or a .500' wide gear fuel pump. The regulator setting should be sufficient to use as a starting point. Minor adjustments can be made after observing fuel pressure at wide open throttle at the end of the straight away or at the end of the finish line. The regulator can be set as 5 PSI or as high as 12 PSI.
A fitting is included to install this regulator into a 3/8 female pipe thread which is commonly used in most fuel logs. The fitting includes a threaded hole for fuel pressure.
PLEASE NOTE: Due to the increased cost of credit card processing, online orders of 3 items or less totaling more than $900.00 will be subject to a credit card processing fee of 4%.
Jet Racing Home, Used Cars, Racemate Alternators, Apparel and Accessories, Body and Interior,
Chassis Accessories, Chemicals, Drive Train and Brakes, Electrical System, Exhaust, Fittings, Garage
and The Pit, Heims and Jam Nuts, Motor, Safety, Suspension, Swedge Tubes, Steering, Wheels and
Tires, Shipping Info, Setup Manual,
About Us